|
| |
| Corning (Cook) Blocks/Shoes |
 |
| Click on image for an enlarged view. |
| |
| Cook 390 | 
|
| Cook 390 Close View | 
|
| TP 1001 |
|
| TP 1001A | 
|
TP 1001A
Close View | 
|
|
The TP 1001 Front Tap Shoe is designed for use with the Cook 388 and 390 type Central Office Main Frame Connectors. The Test Shoe can also be used on the following connectors.
- Cook(Siecor) 310,353,377,378,388,and 390
- Reliable 305, 325, 355, 710, and RG710
- AT&T(Weco) 303 and 302
DESCRIPTION
The TP 1001 consists of the following components:
- Injection molded plastic contact pin housing (black).
- 100 gold-plated Tip Ring contact pins made of copper/nickel alloy.
- 100 contact pin springs made of .010 MW, S&B.
- One black, painted cover made of 16 gauge sheet metal; equipped with two down latching devices and a cable strain relief fitting.
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Cable strain relief at both end (shoe and cinch connector).
- Two 25 pair Female Cinch Connectors
The TP1001A has Amphonels on the one end instead of Cinch Jones.
|
| NTI 391 |
|
| NTI 391 - Close |
|
| TP 1002 Close View | 
|
| TP 1002 Closer View | 
|
|
The TP 1002 Front Tap Shoe is designed for use with NTI's (Cook-Siercor) 391 Central Office Main Frame Connectors.
The TP 1002 (100 pair) is used to connect the user's test equipment to the central office terminal test field.
DESCRIPTION
The TP 1002 consists of the following components:
- Plastic contact pin housing (black).
- 200 gold plated, field replaceable, Tip Ring contact pins.
- Two 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable. soldered terminations.
- Cable strain relief provided at both ends.
- Four 25 pair Female Cinch Jones connectors.
- Equipped with two mounting latching screws.
|
|
| Cook 318 | 
|
| Cook 318 | 
|
| TP 1040 Full View | 
|
| TP 1040 Close View | 
|
|
The TP 1040 Front Tap Shoe is designed for use with a Cook 318 type connector. The Cook 318 does not have a test field so we designed.
The TP 1040 to insert into the connector's jumper terminal field. *Different spacing than Bargoa 318.
DESCRIPTION
The TP 1040 consists of the following components:
- A two-part, 50 pair, machined plastic contact pin housing.
- 200 Tip Ring contact pins.
- 1 black (painted) cover made of 16 gague sheet metal equipped with two screw latches with securing screws.
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations.
- Four 25 pair Female Cinch Jones connectors.
- Cable strain relief provided at both ends (cinch connector and shoe).
|
© 2000 Custom Assembly, Inc.
All rights reserved | |
|
