|
| |
| Ericsson Blocks/Shoes |
 |
| Click on image for an enlarged view. |
| |
Ericsson Block
10 x 10 | 
|
| Ericsson Block Close view | 
|
Ericsson Block
10 x 10 | 
|
| TP 1033 | 
|
|
The TP 1033 is designed for use with the Ericsson NER251 block.
- 50 or 100 pair
available
- Hard-wired or with replaceable heads.
DESCRIPTION
The TP 1033 consists of the following components:
- Ten individual
blocks; ten pair each block.
- Two 15 foot, 50
pair 28 AWG gauge stranded (7/38) tinned wire cable; soldered
terminations.
- Four 25 pair female Cinch Jones connectors
|
| Ericcson RX/5F | 
|
| Ericcson RX/5F | 
|
| TP 1046SM | 
|
|
The TP 1046 SM (Surface Mount) is designed for use with the Ericsson RX/5F type block.
DESCRIPTION
The TP 1046SM consists of the following components:
- 200 field
replaceable, gold-plated contact pins.
- Two 15 foot, 50
pair 28 AWG gauge stranded (7/38) tinned wire cable; soldered
terminations.
- Four 25 pair female
Cinch Jones connectors
- Cable strain relief provided at both ends
|
| Ericsson RX/5F |
|
| Ericsson RX/5F |
|
| TP 1046I | 
|
|
The TP 1046I (Internal Friction Fit) Front Tap Shoe is designed for use with the Ericsson RX/5F type connector blocks.
DESCRIPTION
The TP 1046I consists of the following components:
- 200 sharp,
gold-plated contact pins.
- Ten individual
blocks; ten pair each block.
- Two 15 foot, 50
pair 28 gauge stranded (7/38) tinned wire cables. Soldered
terminations.
- Cable strain relief
provided at both ends.
- Four 25 pair female Cinch Jones connectors
|
| Ericsson RX/5F |
|
| Ericsson RX/5F |
|
| TP 1054 Full View | 
|
| TP 1054 Close View | 
|
|
The TP 1054 Front Tap Shoe is designed for use with the Ericsson RX/5F connector blocks.
DESCRIPTION
The TP 1054 consists of the following components:
- 10 two-part, 5
pair, machined plastic contact pin housing
- 100, Tip Ring flat
spring tempered contact pins.
- A 15 foot, 50 pair
28 gauge stranded (7/38) tinned wire cable. Soldered terminations.
- Cable strain relief
provided at both ends, Cinch Jones connector and test shoe.
- Two 25 pair female Cinch Jones connectors
|
| Ericsson Mini KK with TP 1095 | 
|
| Ericsson Mini KK | 
|
| TP 1095 | 
|
|
DESCRIPTION
The TP 1095 consists of the following components:
- Fits the Mini KK
(see photos)
- 100 pair fixed
probes
- A 15 foot, 50 pair,
28 AWG stranded (7/38) tinned wire cable; soldered terminations.
- Four 25 pair Female
Cinch connectors
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable; soldered
terminations.
|
© 2000 Custom Assembly, Inc.
All rights reserved | |
|
