ADC/Krone Blocks/Shoes
Division Line
Click on image for an enlarged view.
 
ADC/Krone
Krone

ADC/Krone
Krone

ADC/Krone
Krone

TP 1036
TP 1036

The TP 1036 is designed for use with the ADC/Krone C-39104-A92-530/540 block.

DESCRIPTION
The TP 1036 consists of the following components:

  • Ten individual blocks; ten pair each block.
  • Two 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Four 25 pair female Cinch Jones connectors
    • 50 or 100 pair available
    • hard-wire or with replaceable heads



Division Line

Siemens Type 71
Siemens Type 71

Siemens Type 71
Siemens Type 71

Siemens Type 71
Siemens Type 71

TP 1046I
TP 1046I

The TP 1046I (Internal Friction Fit) Front Tap Shoe is designed for use with the Siemens type 71 connector block.

DESCRIPTION
The TP 1046I consists of the following components:

  • 200 sharp, gold-plated contact pins.
  • Ten individual blocks; ten pair each block.
  • Two 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable. Solder terminations.
  • Cable strain relief provided at both ends.
  • Four 25 pair female Cinch Jones connectors



Division Line

* Please be aware that under the ADC/Krone LSA Plus family there is more than one type of block. We are familiar with the five pictured below and are working with ADC/Krone to produce compatible Front Tap Shoes. (Click the images below for a larger view.)

TOP VIEW:

Krone LSA Plus   Krone LSA Plus

SIDE VIEW:

Krone LSA Plus   Krone LSA Plus

Krone LSA plus Series 2 white base
Krone LSA Plus
Krone LSA plus Series 2 white base
Krone LSA Plus larger view not available

TP 1047
TP 1047
TP 1047
TP 1047

The TP 1047 Front Tap Shoe is designed for use with the ADC/Krone LSA Plus Series 2, WHITE DISCONNECT MODULES. (.03 contact pins) It is used to connect the user's test equipment to the central office terminal test field. *Comes in 50 or 100 pair. Does NOT fit LSA NT.

ADC/Krone LSA Plus Series NT Block spec sheet.

DESCRIPTION
The TP 1047 consists of the following components:

  • Five individual heads; ten pair each head.
  • Two 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Four 25 pair Female Cinch Jones connectors

 



Krone LSA plus Series 2 gray base

Krone LSA Plus larger view not available
Krone LSA plus Series 2 gray base

Krone LSA Plus larger view not available
Krone LSA plus Series 2 gray base
 
Krone LSA Plus larger view not available
TP 1074 Full View
Krone LSA Plus larger view not available 
TP 1074 Close View
Krone LSA Plus larger view not available 
 

The TP 1074 (same as the TP1047 above, but uses .02 contact pins) Front Tap Shoe is designed for use with the ADC/Krone LSA Plus Series 2, GRAY CONNECT MODULE. It is used to connect the user's test equipment to the central office terminal test field. Does NOT fit LSA NT.

DESCRIPTION
The TP 1074 consists of the following components:

  • Five individual heads; ten pair each head.
  • .02 contact pins
  • Two 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Four 25 pair Female Cinch Jones connectors


Krone LSA plus Series NT
3M SID C
TP 1087


TP1087 Full View

The TP 1087 Front Tap Shoe is designed for use with the 3M SID C block / the Mini Quante-ADC/ the Krone LSA-Plus NT  Disconnect Block (White body, gray base). It is used to connect the user's test equipment to the central office terminal test field.

DESCRIPTION
The TP 1087 (50 pair Front Tap Shoe) consists of the following components:

  • Five individual heads; ten pair each head.
  • Two 15 foot, 50 pair 28 AWG gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Two 25 pair Female Cinch Jones connectors.


TP 1115 on ADC/Krone Highband
Krone block
ADC/Krone Highband Block
TP 1047
ADC/Krone Highband Block - Top View
TP 1047

The TP 1115 Front Tap Shoe is designed for use with the ADC/Krone LSA Plus Highband. It is used to connect the user's test equipment to the central office terminal test field. *Comes in 50 or 100 pair.

DESCRIPTION
The TP 1115 consists of the following components:

  • Five individual heads; ten pair each head.
  • One - Two 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Two - Four 25 pair Female Cinch Jones connectors
  • Amp connector atop head for connection to cabling



Krone LSA plus Series 10
Top View
Krone block
Krone LSA plus Series 10
Side View
TP 1047
TP1160 Full View
TP 1047
TP1160 Side View
TP 1047
TP1160 Probes
TP 1047
 

The TP 1160 Front Tap Shoe is designed for use with the ADC/Krone LSA Plus Series 10. It is used to connect the user's test equipment to the central office terminal test field. Does NOT fit LSA NT. *Comes in 50 or 100 pair.

DESCRIPTION
The TP 1160 consists of the following components:

  • Five individual heads; ten pair each head.
  • Gold plated contact pins
  • Gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Female Cinch Jones connectors



Division Line

TP 1050 Full View
TP 1050 Full View

TP 1050 Close View
TP 1050 Close View

 

 

The TP 1050 Front Tap Shoe is designed for use with the ADC/Krone Cross-Connect Block.

DESCRIPTION
The TP 1050 consists of the following components:

  • A 15 foot, 25 pair wire cable; soldered terminations.



Division Line

ADC/Krone Block
Full View

ADC/Krone Block
Close view

TP 1069
no picture
available

TP 1069
no picture
available

The TP 1069 Front Tap Shoe is designed for use with the ADC/Krone block.

DESCRIPTION
The TP 1069 consists of the following components:

  • A 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Two 25 pair Female Cinch Jones connector.


Division LineContact Us 

© 2000 Custom Assembly, Inc.
All rights reserved