The TP 1049 Front Tap Shoe is designed for use with the NEC.

DESCRIPTION
The TP 1049 consists of the following components:

• Field replaceable, gold-plated contact pins.
• A 15 foot, 25 pair 28 AWG gauge stranded (7/38)tinned wire cable, extension cord. One end equipped with male amp connectors for connection to the shoe, opposite end is equipped with Female Cinch Jones.

The TP 1181 Front Tap Shoe is designed for use with the NEC NPU 1330 Central Office Main Frame Connector Blocks.

DESCRIPTION

The TP 1181 consists of the following components:

• Injection molded plastic contact pin housing (black)
• 200 plated, field replaceable, precision-aligned Tip-Ring contact pins
• 200 contact pin springs made of .010 MW, S&B
• Equipped with two screw-down latching devices for precision fit
• Cable strain relief complete with snap hook
• A 15 foot, 100 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
• Cable strain relief complete with snap hook for secure positioning
• Four 25 pair Female Cinch Jones

APPLICATION
The TP 1088 Front Tap Shoe is designed for use with the NEC NPU 3100 block.

DESCRIPTION
The TP1088 consists of the following:

• 100 pair, machined plastic contact pin housing
• 200 field replaceable contact pins
• 1 black painted cover made of 16 gauge sheet metal equipped
• Cable strain relief provided at both ends
• Four 25 pair Cinch Jones connectors
• Two screw down latching devices
• Two 15 foot, 50 pair, 28 gauge stranded, tinned wire cable. Soldered terminations.

© 2000 Custom Assembly, Inc.
All rights reserved