The TP1125 Front Tap Shoe is designed for use with the Porta 508 block. It is used to connect the user's test equipment to the central office terminal test field.

The TP1125 consists of the following components:

• Machined, plastic contact pin housing.
• Two 15 foot, 50 pair, 28 gauge stranded (7/38) tinned wire cable, soldered terminations
• 200 plated, field replaceable Tip-Ring contact pins
• 200 contact pin springs made of .010 MW, S&B
• Equipped with screw-down latching device and side latching mechanisms to assure proper connection and contact.
• Cable strain relief complete with snap hook
• Four 25 pair Female Cinch Jones

The TP 1021 Front Tap Shoe is designed for use with Porta 556 type Central Office Main Frame Connector Blocks.

When ordering please state wiring specifications:
Left to Right = TP1021L-R;
Front to Back = TP1021F-B.
Also, please state 8-32 or 10-24 threaded block.

The TP 1021 consists of the following components:

• Injection molded plastic contact pin housing (black)
• 200 plated, field replaceable, Tip-Ring contact pins
• 200 contact pin springs made of .010 MW, S&B
• Equipped with two screw-down latching devices for precision fit
• A 15 foot, 100 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
• Cable strain relief complete with snap hook for secure positioning
• Four 25 pair Female Cinch Jones
• Latching mechanism (mounting screws) to assure proper connection and contact.