|
| |
| Siecor/Corning Blocks/Shoes |
 |
Click on image for an enlarged view.
|
|
|
| Reliable 305 |
|
| Reliable 305 closeup |
|
| TP 1001 |
|
| TP 1001A |
|
TP 1001A
Close View |
|
|
The TP 1001 Front Tap Shoe is designed for use with Reliable type Central Office Main Frame Connectors. This Test Shoe can also be used on the following connectors.
- Cook (Siecor) 303, 310, 353, 377, 378, 388, and 390
- Reliable 305, 325, 355, 710, and RG710
- AT&T (Weco) 303 and 302
DESCRIPTION
The TP 1001 consists of the following components:
- Injection molded plastic contact pin housing(black)
- 100 gold-plated Tip Ring contact pins made of copper/nickel alloy
- 100 contact pin springs made of .010 MW, S&B
- One black, painted cover made of 16 gauge sheet metal; equipped with two down latching devices and a cable strain relief
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Cable strain relief at both ends (shoe and cinch connector)
- Two 25 pair Female Cinch Jones
The TP1001A has Amphonels on the one end instead of Cinch Jones.
|
| TP 1076 |
|
| TP 1076 |
|
| Mexico Siecor block |
|
| |
|
|
The TP 1076 Front Tap Shoe is designed for use with the Mexico Siecor block.
50 pair – Latches
The TP 1076 consists of the following components:
- Injection molded plastic contact pin housing(black) and cover
- 100 Field replaceable contact pins
- Equipped with two screw-down latching devices.
- Two 15 foot, 25 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Two 25 pair Female Scsi Connectors attached to Male Scsi extention cables.
|
| TP 1089 |
|
| TP 1089 |
|
TP 1089
Close View |
|
| TP 1089 |
|
| |
|
| |
|
|
The TP 1089 Front Tap Shoe is designed for use with the Siecor Straight Undivided Central Office Main Frame Connector Blocks.
75 pair – Screw mount, comes with detachable mounting screws
The TP 1089 consists of the following components:
- Injection molded plastic contact pin housing(black)
- 150 plated, field replaceable Tip-Ring contact pins
- 150 contact pin springs made of .010 MW, S&B
- Equipped with two screw-down latching devices for precision fit
- Cable strain relief complete with snap hook for secure positioning
- A 15 foot, 75 pair, 28 AWG stranded (7/38) tinned wire cable; soldered
terminations Cable strain relief at both ends.
- Three 25 pair Female Cinch Jones
|
| TP 1090 |
|
| TP 1090 |
|
TP 1090
Close View | 
|
| |
|
| |
|
|
The TP 1090 Front Tap Shoe is designed for use with Siecor type Central Office Main Frame Connector Blocks.
100 pair – Screw mount, comes with detachable mounting screws
The TP 1090 consists of the following components:
- Injection molded plastic contact pin housing(black)
- 200 plated, field replaceable Tip-Ring contact pins
- 200 contact pin springs made of .010 MW, S&B
- Equipped with two screw-down latching devices for precision fit
- Cable strain relief complete with snap hook
- A 15 foot, 100 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Cable strain relief complete with snap hook for secure positioning
- Four 25 pair Female Cinch Jones
|
| Siecor Block |
|
| TP 1102 on Block |
|
| TP 1102 Close |
|
| TP 1102 Top View |
|
|
The TP 1102 Front Tap Shoe is designed for use with the Mexico Siecor 100 pair block.
100 pair – Screw mount, comes with special non-std mounting screw
The TP 1102 consists of the following components:
- Machined, plastic contact pin housing.
- 200 gold plated, Tip-Ring, field replaceable contact pins
- Two 15 foot, 50 pair, 28 gauge stranded (7/38) tinned wire cable, soldered
terminations
- Four female SCSI connectors on FTS head which connects to male-to-male SCSI extention cord which fits into the user’s testing mechanism.
- Specially designed latching mechanism to assure proper connection and contact.
|
| Siecor Block |
|
| TP 1112 on Block |
|
| TP 1112 |
|
|
The TP 1112 Front Tap Shoe is designed for use with Siecor Straight, Undivided type Central Office Main Frame Connector Blocks.
50 pair - Screw mount, comes with detachable mounting screws
The TP 1112 consists of the following components:
- Injection molded plastic contact pin housing (black)
- 100 plated, field replaceable, precision-aligned Tip-Ring contact pins
- Equipped with two screw-down latching devices for precision fit
- Cable strain relief complete with snap hook
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Cable strain relief complete with snap hook for secure positioning
- Two 25 pair Female Cinch Jones
- Protective plate that fits over the precision-aligned test probes when not in use. The protective plate is tethered to the test cord to prevent its loss when not in use.
- Additional Mounting Screws for additional connection capabilities into the box.
|
| Siecor Block |
|
| TP 1114 Block/Probes |
|
| TP 1114 |
|
|
The TP 1114 Front Tap Shoe is designed for use with Siecor Split with Screw Mount type of Central Office Main Frame Connector Blocks.
50 pair - Screw mount, comes with detachable mounting screws
- The TP 1114 consists of the following components:
- Injection molded plastic contact pin housing (black)
- 100 plated, field replaceable, precision-aligned Tip-Ring contact pins
- Equipped with two screw-down latching devices for precision fit
- Cable strain relief complete with snap hook
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Cable strain relief complete with snap hook for secure positioning
- Two 25 pair Female Cinch Jones
- Protective plate that fits over the precision-aligned test probes when not in use. The protective plate is tethered to the test cord to prevent its loss when not in use.
- Additional Mounting Screws for additional connection capabilities into the box.
|
| TP 1116 |
|
| TP 1116 |
|
|
The TP 1116 Front Tap Shoe is designed for use with Siecor 75 pair Split type Central Office Main Frame Connector Blocks.
75 pair – Latches
The TP 1116 consists of the following components:
- Injection molded plastic contact pin housing (black)
- 150 plated, field replaceable, precision-aligned Tip-Ring contact pins
- Equipped with two screw-down latching devices for precision fit
- Cable strain relief complete with snap hook
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Cable strain relief complete with snap hook for secure positioning
- Three 25 pair Female Cinch Jones
- Protective plate that fits over the precision-aligned test probes when not in use. The protective plate is tethered to the test cord to prevent its loss when not in use.
- Additional Mounting Screws for additional connection capabilities into the box.
|
| TP 1118 Full View |
|
| TP 1118 Latch View |
|
|
The TP 1118 Front Tap Shoe is designed for use with Siecor type Split Blocks.
50 pair - Latches
The TP 1118 consists of the following components:
- Injection molded plastic contact pin housing (black)
- 100 plated, field replaceable, precision-aligned Tip-Ring contact
pins
- 100 contact pin springs made of .010 MW, S&B
- Equipped with two screw-down latching devices for precision
fit
- Cable strain relief complete with snap hook
- A 15 foot, 50 pair, 28 AWG stranded (7/38) tinned wire cable;
soldered terminations
- Two 25 pair Female Cinch Jones
- Protective plate that fits over the precision-aligned test
probes when not in use. The protective plate is tethered to the
test cord to prevent its loss when not in use.
|
| TP 1120 Full View |
|
| TP 1120 Latch View |
|
|
The TP 1120 is a 75 pair Front Tap Shoe designed for use with Siecor type Split Blocks.
75 pair – Latches
The TP 1120 consists of the following components:
- Injection molded plastic contact pin housing (black)
- 150 plated, field replaceable, precision-aligned Tip-Ring contact pins
- 150 contact pin springs made of .010 MW, S&B
- Equipped with two screw-down latching devices for precision fit
- Cable strain relief complete with snap hook
- A 15 foot, 75 pair, 28 AWG stranded (7/38) tinned wire cable; soldered terminations
- Three 25 pair Female Cinch Jones
- Protective plate that fits over the precision-aligned test probes when not in use. The protective plate is tethered to the test cord to prevent its loss when not in use.
|
© 2000 Custom Assembly, Inc.
All rights reserved | |
|
