The TP 1046I (Internal Friction Fit) Front Tap Shoe is designed for use with the Siemens/Krone/Ericsson RX/5F T type 71 connector block.

DESCRIPTION
The TP 1046I consists of the following components:

• 200 sharp, gold-plated contact pins.
• Ten individual blocks; ten pair each block.
• Two 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable. Solder terminations.
• Cable strain relief provided at both ends.
• Four 25 pair female Cinch Jones connectors

The TP 1067 Front Tap Shoe is designed for use with the Siemens 2000 connector block.

DESCRIPTION
The TP 1067 consists of the following components:

• 200 pair
• Four 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable. Solder terminations.
• Eight 25 pair Female Cinch Jones connectors

The TP 1068 Front Tap Shoe is designed for use with the Siemens 1000 connector block.

DESCRIPTION
The TP 1068 consists of the following components:

• 200 pair
• Four 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable. Solder terminations.
• Eight 25 pair Female Cinch Jones connectors

The TP 1069 Front Tap Shoe is designed for use with the Krone/Quante (Siemens) connector block.

DESCRIPTION
The TP 1069 consists of the following components:

• 200 pair
• Four 15 foot, 50 pair 28 gauge stranded (7/38) tinned wire cable. Solder terminations.
• Eight 25 pair Female Cinch Jones connectors

© 2000 Custom Assembly, Inc.
All rights reserved