 |
AT&T T-Handle SS Key ... more
|
 |
The TP 1001 Front Tap Shoe is designed for use with the AT&T 303 and 302 type Central Office Main Frame Connectors. The Test Shoe can also be used on the following connectors. ... more
|
 |
The TP 1002 Front Tap Shoe is designed for use with the AT&T's 310/311, and the Seicor 391 Central Office Main Frame Connectors. ... more
|
 |
The TP1003 Front Tap Shoe is designed for use with Reliable's 399, Porta’s P399 (Reltec/Marconi/Emerson) Central Office Main Frame Connectors. ... more
|
 |
The TP 1004 Front Tap Shoe are designed for use with the AT&T's 305 Central Office Main Frame Connectors. ... more
|
 |
The TP 1005 Front Tap Shoe is designed for use with the Lucent 308 block. (The 1005A has 4 male amp connectors in place of cinch jones connectors). ... more
|
 |
The TP 1006 Front Tap Shoe is designed for use with the AT&T C50 main frame connector. Use with C50 Main frame connector (Stackable) (Same as TP1008 different pins) ... more
|
 |
The TP 1010 Front Tap Shoe is designed for use with the Reliable RLS-50 cross connect terminal. ... more
|
 |
The TP 1011 Front Tap Shoe is designed for use with the Reliable CQF50 cross connect binding post terminal. Also called the Mini BT 50. ... more
|
 |
The TP1013 Front Tap Shoe is designed for use with the 88/108/110 Series Blocks. Also called 188 blocks in BEE Boxes. It is used to connect the user's test equipment to the central office terminal ... more
|
 |
The TP1014 Front Tap Shoe is designed for use with the 444 connector. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP1015 (100 pair) Front Tap Shoe is designed for use with the AT&T type 76 terminal block. ... more
|
 |
The TP1016 (50 pair) Front Tap Shoe is designed for use with the AT&T type 76 terminal block. ... more
|
 |
The TP 1017QF (Quiet Front) Front Tap Shoe is designed for use with the 3M 4310-25 binding post terminals. ... more
|
 |
The TP1017SS (Self Strip) Front Tap Shoe is designed for use on the 3M 4320 terminal. Self-Strip type connector for test set interface. ... more
|
 |
The TP 1018 Front Tap Shoe is designed for use with the Reliable 66 (M Block) blocks. Single row testing, vertically wired R/T for use at x-connect (M Block) uses a Siemons TAP50, 25 pair. ... more
|
 |
The TP 1019 Front Tap Shoe is designed for use with Reliable's BT-25 terminals. ... more
|
 |
The 100 pair TP1020 Front Tap Shoe (replaces the TP1077) is designed for use with the Northern Telecom QCM 486 Block and the Circa 4486. ... more
|
 |
The TP1021 Front Tap Shoe is designed for use with Porta 556 type Central Office Main Frame Connector Blocks. ... more
|
 |
The TP 1022 is designed for use with the BIX (QCBIX) IDC Connector ... more
|
 |
The TP 1027, TP1027B, and TP1027S Front Tap Shoes are designed with alligator,butt(B), or small(S) clips to interface with almost any 25 pair terminal. Each of the five seperate branches contain five ... more
|
 |
TP 1028 Front Tap Shoe is designed to connect the user's test equipment to the Reliable 700 terminals. ... more
|
 |
The TP1033 is designed for use with the Ericsson NER251 block. ... more
|
 |
The TP 1034 Front Tap Shoe is designed for use on with the BAB 340 block (Ericsson 50 pair). ... more
|
 |
The TP 1035 Front Tap Shoe is designed for use with the Reichle De Massari block. ... more
|
 |
The TP1036 is designed for use with the ADC/Krone C-39104-A92-530/540 block. ... more
|
 |
The TP1040 Front Tap Shoe is designed for use with a Cook 318 type connector. The Cook 318 does not have a test field so we designed the TP1040 to insert into the connector's jumper terminal field. ... more
|
 |
The TP 1045 Front Tap Shoe is designed for use with the AT&T MDF 9000. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP 1046I (Internal Friction Fit) Front Tap Shoe is designed for use with the Siemens type 71 connector block, this shoe is also designed for use with the Ericsson RX/5F type connector blocks. ... more
|
 |
The TP1047 Front Tap Shoe is designed for use with the ADC/Krone LSA Plus Series 2, WHITE DISCONNECT MODULES or GRAY CONNECT MODULE. It is used to connect the user's test equipment to the central ... more
|
 |
The TP1047-SP is a custom designed single pair test cord to fit the Krone LSA+ Series 2 blocks ... more
|
 |
The TP 1048 Front Tap Shoe is designed for use with the 10 pair 3M STG-2 (formerly the Quante, Pouyet 2000, STGC210 and STGS210T). It is used to connect the user's test equipment to the central ... more
|
 |
The TP 1049 is a 50 pair Front Tap Shoe designed for use with the NEC. ... more
|
 |
The TP 1050 Front Tap Shoe is designed for use with the ADC/Krone Cross-Connect Block. ... more
|
|
The TP 1057 Front Tap Shoe is designed for use on with the Bargoa 318 block. (Similiar to the Cook 318 - hole pattern different) ... more
|
|
The TP 1061 Front Tap Shoe is designed for use with the Figi Phillips 1800. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP 1064 Front Tap Shoe is designed for use with the MONDRAGON QDF. ... more
|
 |
The TP1065 Front Tap Shoe is designed for use on with the Costa Rica Simelca Block. ... more
|
 |
The TP 1066 Front Tap Shoe is designed for use with the Alcatel 5 AR 39 19 block. ... more
|
 |
The TP 1067 Front Tap Shoe is designed for use with the Siemens 2000 connector block. ... more
|
 |
The TP 1068 Front Tap Shoe is designed for use with the Siemens 1000 connector block. ... more
|
|
The TP 1069 Front Tap Shoe is designed for use with the ADC/Krone block. ... more
|
 |
The TP 1070 Front Tap Shoe is designed for use with mini gripper connectors to interface with almost any 25 pair terminal. Each of the five separate branches contain five pairs of mini grippers for ... more
|
 |
The TP 1071 Front Tap Shoe is designed for use with the ZAU 200 block. ... more
|
 |
The TP1072 Fits AT&T's 110 DWI-25 Block. ... more
|
 |
The TP 1073 Front Tap Shoe is a 25 pair FTS designed for use with the Ericsson connector blocks (South America). ... more
|
 |
The TP 1079 Front Tap Shoe is 100 pair and designed for use with the 299 AT&T Lucent 307 (Cosmic with Protection plugs into heat coils) type Central Office Main Frame Connector Blocks. ... more
|
 |
The TP 1080 Front Tap Shoes are designed to fit any 300 Type series blocks. ... more
|
 |
The TP1081 Front Tap Shoe is designed for use with the Lucent/Avaya/Cosmic 112 Central Office Main Frame Connector Blocks. ... more
|
 |
The TP 1083 Front Tap Shoe is designed for use with the Pouyet Sofycom STC100 Block.. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP 1084 Front Tap Shoe is designed for use with Porta 503 Block. ... more
|
 |
The TP1085 Front Tap Shoe is designed for use with the Alcatel Block. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP 1087 Front Tap Shoe is designed for use with the 3M SID C block / the Mini Quante-ADC/ the Krone LSA-Plus NT Disconnect Block (White body, gray base). It is used to connect the user's ... more
|
 |
The TP1088 Front Tap Shoe is designed for use with the NEC NPU 3100 block. ... more
|
 |
The TP1089 Front Tap Shoe is designed for use with the Siecor Straight Undivided Central Office Main Frame Connector Blocks. ... more
|
 |
The TP 1090 Front Tap Shoe is designed for use with Siecor type Central Office Main Frame Connector Blocks ... more
|
 |
The TP 1093 is designed for use with the New Simelca Block. ... more
|
 |
The TP1095 Front Tap Shoe is designed for use with the Ericsson Mini KK connector blocks. ... more
|
 |
The TP1096 is designed for use with the Metaconta Block. ... more
|
 |
The TP1097 is designed for use with the Convencional Block. ... more
|
 |
The TP1098 Front Tap Shoe is designed for use with Brazil’s RX 5 Connector Blocks. ... more
|
 |
The TP1099 Front Tap Shoe is designed for use with the Columbian Trucco (Armenia-Liston) Block. It is used to connect the user’s test equipment to the central office terminal test field. ... more
|
 |
The TP1101 Front Tap Shoe is designed for use with the Columbia Vertical Simelca Block. It is used to connect the user’s test equipment to the central office terminal test field. ... more
|
 |
The TP1002 Front Tap Shoe is designed for use with Siecor type Central Office Main Frame Connectors. This Test Shoe can also be used on the following connectors. ... more
|
 |
The TP 1103 Front Tap Shoe is designed for use with Reliable Special Stacking Blocks. ... more
|
 |
The TP1104R Front Tap Shoe is designed for use with the Mexican Mejorada. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP1105R Front Tap Shoe is designed for use with the Mexican Tradicional. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP 1106 Front Tap Shoe is designed for use with the Reliable 6500 series terminal block. ... more
|
 |
The TP1107 Front Tap Shoe is designed for use on the 3M MS2 (4010E). The TP1025 is obsolete and replaced with the TP1107. ... more
|
 |
The TP 1112 Front Tap Shoe is designed for use with the Siecor Straight Undivided block. ... more
|
 |
The TP 1114 Front Tap Shoe is designed for use with Siecor Split with Screw Mount type of Central Office Main Frame Connector Blocks. ... more
|
 |
The TP1115 Front Tap Shoe is a prototype design for use with the Krone Highband. ... more
|
 |
The TP 1116 Front Tap Shoe is designed for use with Siecor 75 pair Split type Central Office Main Frame Connector Blocks. ... more
|
 |
The TP 1118 Front Tap Shoe is designed for use with Siecor type Split Blocks. ... more
|
 |
The TP 1120 is a 75 pair Front Tap Shoe designed for use with Siecor type Split Blocks. ... more
|
 |
The TP1125 Front Tap Shoe is designed for use with the Porta 508 block. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
 |
The TP1126 Front Tap Shoe (50 pair) is designed for use with AT&T Tool Less also called the 99 type Central Office Main Frame Connector Blocks. ... more
|
 |
The TP1150 is used with the Pouyet block. ... more
|
 |
The TP1151 is made to fit the Emerson (Marconi, Reliable, Reltec) URLS block. ... more
|
 |
The TP1160 Front Tap Shoe is designed for use on the Krone LSA+Series 10. ... more
|
 |
The TP 1171 Front Tap Shoe is 50 pair and designed for use with the Egerton/ Tyco-Hub Snap/ Channell blocks. ... more
|
 |
The TP1177 Front Tap Shoe is designed for use with the ADC/Krone LSA Plus HD. It is used to connect the user's test equipment to the central office terminal test field. ... more
|
|
The TP1181 Front Tap Shoe is designed for use with the NEC NPU 1330 Central Office Main Frame Connector Blocks. ... more
|
 |
The TP1190 Front Tap Shoe is a 100 pair FTS designed for use with the R & M connector block. ... more
|
 |
The TP1191 Front Tap Shoe is designed to fit the Huawei FA8-72 ... more
|
 |
The TP1200-50 (also available in 100 pair) is designed to fit the 3M Quick Connect System 2810 ... more
|
 |
The TP1215-H Front Tap Shoe is designed for use with TE Conductivites C5C. ... more
|
 |
The TP 1225 Front Tap Shoe is IN DEVELOPMENT and will be designed for use with the 3M 4320-100 block. ... more
|
 |
The TP1235 Front Tap Shoe is designed for use on the 3M 4510. The 3M 4510 is part of the 4500 SYSTEM of blocks. The 3M 4510 is the 10-pair Module Terminating System. ... more
|
 |
The TP1250 is used with the New Zealand 100 pair block. ... more
|
 |
TP1292 is a 100 pair Front Tap Shoe to be used on the 3M ID 3000 ... more
|
 |
The TP1297-A is a 100 pair Front Tap Shoe used with the the Netherland block ID2000 or the K2000; these are the same block type which is the screw terminal and is also known as the ... more
|
 |
The TP1297-SP is a custom designed cord for single pair testing of the Waaier K1200 block ... more
|
 |
The TP 2001 (25 pair) Front Tap Shoe is designed for use with Tyco/HUB Shorting Block. ... more
|
 |
The TP2009 (50 pair) Front Tap Shoe is designed for use with Tyco/HUB Shorting Block. ... more
|
 |
The newly engineered TP 2011 Front Tap Shoe is designed for use with a B Type Block. ... more
|
 |
The TP2045 is designed for use with Telekom Malaysia and also the New Zealand Pillar Blocks. ... more
|
