TP1010

TP 1010

TP1010 pins

 

TP1010 Connected to RLS-50

RLS 50

The TP 1010 Front Tap Shoe is designed for use with the Reliable RLS-50 cross connect terminal.

The TP 1010 is used to connect user's test equipment to the Field RLS-50 cross connect terminal.

The TP 1010 consists of the following components:

 

  • Field replaceable probes.
  • Machined plastic pin housings.
  • A 15 foot, 50 pair 28 AWG gauge stranded (7/38) tinned wire cable; soldered terminations.
  • Customized latch mechanisms to assure proper connection and contact (see Installation Tab).
  • Two 25 pair Female Cinch Jones connectors or Amps depending on customer's needs.
  1. While holding handles outward (so that latches pull in), align probes with block slots.
  2. Pull down locking lever so that the latches pull the Front Tap Shoe down and the probes lock into place.
  3. IMPORTANT: When removing Front Tap Shoe, pull up the locking lever, then pull out the handles to release the latches.