DESCRIPTION
Shown here is the BF600 Horizontal Sequence block - No Front Tap Shoes are available for these pole-mounted cross-connect terminals due to mounting attachment restrictions, thus, Custom Assembly has developed these 5 pair clips for testing purposes.
With Pole Mounted Devices, if the ID# begins with a 'BH' it means the Pole Mount Stub is out the top; if the ID# begins with a 'BJ' it means the Pole Mount Stub is out the bottom.
For the BF series, there is 1/2" spacing between the Tip and Ring, and 5/8" spacing to the next pair.
When ordering, please specify spacing specifications.
TP 2004 = ½” center with ½’ space between pairs
TP 2005 = 7/16 Centers (Typical all the way across)
TP2008 = Test Clips 1/2 centers with 5/8 space between pairs
TP2011 = Test Clips 19/32 Centers (Typical all the way across) (replaces TP1108) |
