TP1107
TP1107
TP1107-AC
to use if block is warped
3M MS2
TP1107 on the 3M 4005DPM
TP1107 on the 3M 4000DTR
The TP1107 Front Tap Shoe is designed for use on the 3M MS2 (4010E).
The TP1025 is obsolete and replaced with the TP1107.
The 4010 is for Feeder side/4011 is for Distribution and the only difference is the color. All physical characteristics are identical.
The TP1107 also fits the 3M 4000DTR and the 3M 4005DPM.
*Please note: due to the obsolescence of Cinch Jones connectors, all our Front Tap Shoes are now manufactured with male bail lock AMP connectors.
See details/descriptions at http://www.customassemblyinc.com/testequipment/
The TP 1107 consists of the following components:
- A 25 pair, machined plastic contact pin housing.
- A 15 foot, 25 pair, 28 gauge stranded (7/38) tinned wire cable that is solder terminated on a 25 pair Cinch Jones Female connector or Amp Connector.
- Field replaceable test probes.
- Shoe latch mechanisms to assure proper connection and contact.
TP1107-AC Auxiliary Clamp for the TP1107:Used if MS2 is bowed in the center. Typically used in extreme cold or hot areas.